Step 1: Determine blind and arch starting height at perfect point of window opening.

Step 2: Measure blind WIDTH and blind LENGTH.

Step 3: Measure arch WIDTH and arch HEIGHT.

Step 4: Make sure blind length and arch height = TOTAL height of window.

Note: In extended arch windows make arch height fit into the arch height min/max so a perfect arch will fit. Do this by moving the blind up or down. Once again the total height of arch window opening should equal the blind length and the arch height.

2. Stand Alone Arch Window with Sill

Arch rests directly on sill and a standard valance covers mounting holes.

Note: We cannot use a 3 1/2" decorative valance because the bottom of the arch frame is only 2 3/4". Therefore a standard 2 1/2" valance is required.

3. Stand Alone Arch Window with No Sill

Arch rests directly on bottom of arch sheet rock ledge so a valance is required to cover any light gaps.

GENERAL COMMENTS

Perfect arch definition: A perfect arch does not exist but, if it did, it would be
HEIGHT = half the WIDTH.

OLD THINKING: We have been trained by customer service when we order a honeycomb arch that it must be perfect... example 34 1/2" by 17 1/4". If we ordered the same width and wanted 17 3/8", you could NOT order it and were told to make a template.

NEW THINKING: First SEE PRICE CHART and NO TEMPLATES. Perfect arches come in 3" increments and will fit irregular windows with a 1 7/8" front face overlap. See chart to determine if your window arch opening fits the width and the height. If it does then you can be assured that it will fit your window. If it is out of the size, we can build it anyway and it is priced as an eyebrow / custom arch.

A template is needed for ellipse windows and eyebrows where there is no distinct radius corners.

When ordering always specify type of mount because it determines what type of valance is needed

Click here to learn how to measure Eyebrow Arches.

Although we do our best to make sure that the colors shown on our web site are accurate, actual colors
can vary slightly. In addition, subtle color differences and textures may not be fully appreciated on some systems.
Dye lots can vary on some blinds. Due to the fact that our products are all custom made, and CAN'T BE RETURNED,
you may wish to have a sample sent to you before ordering.

SellBlinds.com • ByteMeDomains.com • Ozark, Missouri • USA • 417-429-1633

Sales and Customer Service can be reached 9:00am to 5:00pm, CST, Monday through Friday by email or telephone.
Trademarks mentioned on this site belong to their respective owners, even if not clearly identified.
We value your privacy and do not sell or provide your personal information to other companies.

web development: ByteMeDomains.com